- -

Thin wall section elastic-plastic

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

  • Estadisticas de Uso

Thin wall section elastic-plastic

Mostrar el registro completo del ítem

Agüero Ramón Llin, A. (2025). Thin wall section elastic-plastic. http://hdl.handle.net/10251/213939

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/213939

Metadatos del ítem

Título: Thin wall section elastic-plastic
Autor: Agüero Ramón Llin, Antonio
Entidad UPV: Universitat Politècnica de València. Departamento de Mecánica de los Medios Continuos y Teoría de Estructuras - Departament de Mecànica dels Medis Continus i Teoria d'Estructures
Fecha difusión:
Resumen:
The following application allows determining the resistant capacity of open and closed thin-walled sections subjected to axial, biaxial bending, bimoment, Shear, Saint Venant torsion (closed) and warping torsion. In this ...[+]
Palabras clave: Sections , Elastic-plastic material , Shear stresses analysis , Plasticity index
Código UNESCO: 3305 - Tecnología de la construcción
Derechos de uso: Reconocimiento (by)
Tipo: Objeto de aprendizaje
URL: https://laboratoriosvirtuales.upv.es/webapps/thinwallsectionelasticplastic.html
Tipo de recurso educativo: Laboratorio virtual de simulación
Descripción acerca del uso: The geometry of the section, the type of material, and the combination of axial, biaxial bending, bimoment, shear, Saint Venant torsion (closed), and warping torsion are defined. Class 3 elastic stresses and plastification factor Class 1 and 2 sections are determined. The axial-biaxial bending-bimoment interaction diagram is represented if desired, and the properties of the section are determined. The notation follows Eurocode 3: To add nodes or elements push Add, to remove them push Remove. Start node of each element should have been defined as end nodes of previous elements. Example number. The user can choose between 19 examples which geometry is already defined in the software. All examples are editables. Mesh: can have 1 or 2 layers.
Destinatario: Alumno
Contexto: Ciclo superior
Dificultad: Dificultad media
Nivel de interactividad: Alto
Densidad semántica: Medio
Tiempo típico: 04 horas 00 minutos
Idioma del destinatario: Inglés
Permiso de acceso: PUBLICO

recommendations

 

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem